Back to News
Industry Insights
2026.02.05
Gas Generator Solutions: Multi-Fuel Adaptability and Cost-Efficient Operation
1、 Multi fuel adaptability
Mainstream fuel support
Natural gas (NG): most commonly used, clean burning, suitable for urban pipe network coverage;
Liquefied natural gas (LNG) or compressed natural gas (CNG): applicable to areas without pipeline gas;
Biogas, landfill gas and biomass gas: renewable gas to help carbon neutrality;
Some models support hydrogen doped combustion (such as the proportion of H ₂ ≤ 20%), which is oriented to future low-carbon upgrading.
Flexible fuel switching
Equipped with intelligent fuel control system, which can automatically or manually switch between different fuels;
The combustion system (such as air-fuel ratio control and ignition parameters) is adjusted adaptively to ensure stable combustion efficiency;
Support dual fuel mode (such as natural gas+diesel), automatically start standby fuel in case of gas interruption, and ensure power supply continuity.
2、 Economic operation strategy
High thermal efficiency design
Advanced technologies such as lean combustion and premixed combustion are adopted, and the power generation efficiency can reach more than 40%;
Combined with waste heat recovery (such as smoke, gas, hot water/steam), the comprehensive energy utilization efficiency (CCHP) can reach 85%.
Intelligent load tracking
Automatically adjust the output power according to the power demand to avoid the efficiency decline caused by low load "dry burning";
Support coordinated dispatching with power grid, energy storage or other energy equipment, participate in peak shaving and valley filling, and reduce energy cost.
Low operation and maintenance cost
Less carbon deposition in gas combustion, long engine oil replacement cycle, and lower maintenance frequency than diesel engine;
The remote monitoring and predictive maintenance function can give early warning of faults and reduce unplanned downtime.
Policies and carbon benefits
The use of biogas, biomass gas and other renewable gas can apply for green power certification or carbon emission reduction subsidies;
In some areas, they can enjoy preferential electricity prices for gas power generation or environmental protection incentive policies.
3、 Typical application scenarios
Industrial park: use natural gas or industrial by-product gas to realize combined heat and power supply;
Sewage treatment plant/breeding farm: consume biogas locally and turn waste into electricity;
Micro grid in remote areas: LNG+gas units provide stable and clean energy;
Data center/hospital: dual fuel unit ensures high reliability power supply.
4、 Implementation recommendations
First of all, fuel evaluation: determine the gas source composition, pressure, supply stability, and match the unit configuration;
Customized model selection: select appropriate models according to load characteristics, operation duration and environmental protection requirements;
System integration and optimization: bring gas turbine units into the integrated energy management system (EMS) to achieve the global optimization of energy efficiency;
Regularly calibrate the combustion system: ensure that it remains efficient and low emissions after multi fuel switching.
Mainstream fuel support
Natural gas (NG): most commonly used, clean burning, suitable for urban pipe network coverage;
Liquefied natural gas (LNG) or compressed natural gas (CNG): applicable to areas without pipeline gas;
Biogas, landfill gas and biomass gas: renewable gas to help carbon neutrality;
Some models support hydrogen doped combustion (such as the proportion of H ₂ ≤ 20%), which is oriented to future low-carbon upgrading.
Flexible fuel switching
Equipped with intelligent fuel control system, which can automatically or manually switch between different fuels;
The combustion system (such as air-fuel ratio control and ignition parameters) is adjusted adaptively to ensure stable combustion efficiency;
Support dual fuel mode (such as natural gas+diesel), automatically start standby fuel in case of gas interruption, and ensure power supply continuity.
2、 Economic operation strategy
High thermal efficiency design
Advanced technologies such as lean combustion and premixed combustion are adopted, and the power generation efficiency can reach more than 40%;
Combined with waste heat recovery (such as smoke, gas, hot water/steam), the comprehensive energy utilization efficiency (CCHP) can reach 85%.
Intelligent load tracking
Automatically adjust the output power according to the power demand to avoid the efficiency decline caused by low load "dry burning";
Support coordinated dispatching with power grid, energy storage or other energy equipment, participate in peak shaving and valley filling, and reduce energy cost.
Low operation and maintenance cost
Less carbon deposition in gas combustion, long engine oil replacement cycle, and lower maintenance frequency than diesel engine;
The remote monitoring and predictive maintenance function can give early warning of faults and reduce unplanned downtime.
Policies and carbon benefits
The use of biogas, biomass gas and other renewable gas can apply for green power certification or carbon emission reduction subsidies;
In some areas, they can enjoy preferential electricity prices for gas power generation or environmental protection incentive policies.
3、 Typical application scenarios
Industrial park: use natural gas or industrial by-product gas to realize combined heat and power supply;
Sewage treatment plant/breeding farm: consume biogas locally and turn waste into electricity;
Micro grid in remote areas: LNG+gas units provide stable and clean energy;
Data center/hospital: dual fuel unit ensures high reliability power supply.
4、 Implementation recommendations
First of all, fuel evaluation: determine the gas source composition, pressure, supply stability, and match the unit configuration;
Customized model selection: select appropriate models according to load characteristics, operation duration and environmental protection requirements;
System integration and optimization: bring gas turbine units into the integrated energy management system (EMS) to achieve the global optimization of energy efficiency;
Regularly calibrate the combustion system: ensure that it remains efficient and low emissions after multi fuel switching.